Appears to behave incorrectlyCompiler crash · Fortran · OpenMP · Open

ftn: internal compiler error "ACC - barrier/reset/protected last private not supported" for linear and lastprivate on a loop in a target region

Legality: not independently confirmed. no independent review yet How this is checked

Same issue as catalog/cce-linear-lastprivate-ice; this program is another reproducer of it.

Affected variants

Compiler	MI300A gfx942 unified memory (XNACK 1)	MI300A gfx942 copy (XNACK 0)	MI250X gfx90a copy (XNACK 0)	MI300X gfx942 copy (XNACK 0)	MI350X gfx950 copy (XNACK 0)	A100 sm_80 separate memory	A100 sm_80 managed memory
AFAR 24.3.0	correct	correct	unknown not run	correct	correct	n/a	n/a
CCE 19.0.0	behaves incorrectly	behaves incorrectly	unknown not run	unknown not run	unknown not run	n/a	n/a
CCE 20.0.2	behaves incorrectly	behaves incorrectly	unknown not run	unknown not run	unknown not run	n/a	n/a
CCE 21.0.3	behaves incorrectly	behaves incorrectly	unknown not run	unknown not run	unknown not run	n/a	n/a
CCE 21.0.4	behaves incorrectly	behaves incorrectly	unknown not run	unknown not run	unknown not run	n/a	n/a
NVHPC 25.11	n/a	n/a	n/a	n/a	n/a	correct	correct
NVHPC 26.9	n/a	n/a	n/a	n/a	n/a	correct	correct
GCC 16.2.0	correct	correct	correct	correct	correct	correct	n/a

"behaves incorrectly" / "not supported": this issue, confirmed in up to four environments (another build directory, another node, a repeat). "fails another way": a different failure, not counted as this issue. "unknown": not run there, or the runs disagree.

Messages

Result	Compiler and GPU	Message
behaves incorrectly	CCE 19.0.0, MI300A unified CCE 19.0.0, MI300A copy	show Warning: Headers and libraries from cray-libsci/25.03.0 will be ignored because depends on PE_MPICH which is unavailable.. Error message :: ACC - barrier/reset/protected last private not supported Error detected :: File '/workspace/crayftn/pdgcs/v_mt_translate.c', line 4874 Initiated from :: Line 1849 (v_main.c) Optimizer built :: 2025-02-07 (production) File :: fuzz-1391-cce20.f90 Function :: fuzz_prog
behaves incorrectly	CCE 20.0.2, MI300A unified CCE 20.0.2, MI300A copy	show Warning: Headers and libraries from cray-libsci/25.09.0 will be ignored because depends on PE_MPICH which is unavailable.. Error message :: ACC - barrier/reset/protected last private not supported Error detected :: File '/workspace/crayftn/pdgcs/v_mt_translate.c', line 5607 Initiated from :: Line 1859 (v_main.c) Optimizer built :: 2025-11-17 (production) File :: fuzz-1391-cce20.f90 Function :: fuzz_prog
behaves incorrectly	CCE 21.0.3, MI300A unified CCE 21.0.3, MI300A copy	show Warning: Headers and libraries from cray-libsci/26.03.0 will be ignored because depends on PE_MPICH which is unavailable.. Error message :: ACC - barrier/reset/protected last private not supported Error detected :: File '/workspace/crayftn/pdgcs/v_mt_translate.c', line 5798 Initiated from :: Line 1939 (v_main.c) Optimizer built :: 2026-07-14 (production) File :: fuzz-1391-cce20.f90 Function :: fuzz_prog
behaves incorrectly	CCE 21.0.4, MI300A unified CCE 21.0.4, MI300A copy	show Warning: Headers and libraries from cray-libsci/26.03.0 will be ignored because depends on PE_MPICH which is unavailable.. Error message :: ACC - barrier/reset/protected last private not supported Error detected :: File '/workspace/crayftn/pdgcs/v_mt_translate.c', line 5798 Initiated from :: Line 1939 (v_main.c) Optimizer built :: 2026-09-24 (production) File :: fuzz-1391-cce20.f90 Function :: fuzz_prog

Reproduce

CCE 19.0.0, MI300A unified

module load cce/19.0.0 craype-accel-amd-gfx942 rocm/6.4.3
module unload cray-mpich
ftn -fopenmp -O2 repro.f90 -o repro
HSA_XNACK=1 OMP_TARGET_OFFLOAD=mandatory ./repro

CCE 20.0.2, MI300A unified

module load cce/20.0.2 craype-accel-amd-gfx942 rocm/6.4.3
module unload cray-mpich
ftn -fopenmp -O2 repro.f90 -o repro
HSA_XNACK=1 OMP_TARGET_OFFLOAD=mandatory ./repro

CCE 21.0.3, MI300A unified

module load cce/21.0.3 craype-accel-amd-gfx942 rocm/7.2.0
module unload cray-mpich
ftn -fopenmp -O2 repro.f90 -o repro
HSA_XNACK=1 OMP_TARGET_OFFLOAD=mandatory ./repro

CCE 21.0.4, MI300A unified

module load cce/21.0.4 craype-accel-amd-gfx942 rocm/7.2.0
module unload cray-mpich
ftn -fopenmp -O2 repro.f90 -o repro
HSA_XNACK=1 OMP_TARGET_OFFLOAD=mandatory ./repro

AFAR 24.3.0, MI300A unified (runs correctly)

$AFAR/bin/amdflang -fopenmp --offload-arch=gfx942 -O2 repro.f90 -o repro
HSA_XNACK=1 OMP_TARGET_OFFLOAD=mandatory ./repro

Program (35 lines)

! Minimized by compliance.fuzz_min from fuzz seed 1391 (fuzz-1).
! toolchain: cce20 (-O2, HSA_XNACK=1, OMP_TARGET_OFFLOAD=mandatory)
! failure: ice (ice: INTERNAL COMPILER ERROR: "ACC - barrier/reset/protected last private not supported" (v_mt_translate.c, line
!   5607, version <v>))
! expected: compiles
! observed: internal compiler error: ice: INTERNAL COMPILER ERROR:  "ACC - barrier/reset/protected last private not supported"
!   (/workspace/crayftn/pdgcs/v_mt_translate.c, line 5607, version 668d73f
! Legal OpenMP 5.2: offload.engine.prerun.check accepts it (rerun: offload.engine.rules with the
!   race rule and the restriction checks, and the AFAR flang front end, not under test here); no
!   compiler under test, gfortran or gcc is a legality witness.
! also fails on: cce19, cce21
program fuzz_prog
  use omp_lib, only: omp_is_initial_device
  implicit none
  integer, parameter :: n = 32, m = 8
  integer :: i, j, lp1, t1
  integer(8) :: cs
  lp1 = 0
  ! fuzz: kernels
  !$omp target
    !$omp parallel
      !$omp do lastprivate(lp1) private(t1)
      do i = 1, n
        do j = 1, m
          t1 = 0
          lp1 = 0
        end do
      end do
    !$omp end parallel
  !$omp end target
  ! fuzz: checksum
  cs = 0
  cs = modulo(cs * 31_8 + int(lp1, 8), 2147483629_8)
  print '(a,i0,a,i0)', 'RESULT checksum=', cs, ' ran_on_host=', 0
end program fuzz_prog

Source in the repository

Something to add? Dispute its legality · Report it fixed in a newer release · Report a mistake on this page

Expected and observed

Observed where it behaves incorrectly

Warning:
 Headers and libraries from cray-libsci/25.03.0 will be ignored because depends on PE_MPICH which is unavailable..
   Error message      ::  ACC - barrier/reset/protected last private not supported
   Error detected     ::  File '/workspace/crayftn/pdgcs/v_mt_translate.c', line 4874
   Initiated from     ::  Line 1849 (v_main.c)
   Optimizer built    ::  2025-02-07 (production)
   File               ::  fuzz-1391-cce20.f90
   Function           ::  fuzz_prog

What the specification requires

The specification text this program relies on and the compiler is expected to support.

The same requirement as the issue catalog/cce-linear-lastprivate-ice.

OpenMP 5.2 §5.4.6 p.118

Evidence

Other compilers run it correctly

AFAR 24.3.0, NVHPC 25.11, NVHPC 26.9, GCC 16.2.0